3. Product Component Names and Function Introduction
3.1 Product main body
| No. |
Name |
Qty. |
| 1 |
Flat plate collector 1 |
1 |
| 2 |
Flat plate collector angle adjuster |
1 |
| 3 |
Flat plate collector 2 |
1 |
| 4 |
Light intensity sensor |
1 |
| 5 |
Exhaust valve |
2 |
| 6 |
Main drain pipe |
1 |
| 7 |
Main water inlet pipe |
1 |
| 8 |
Output AC 220 V socket |
1 |
| 9 |
Touch screen |
1 |
| 10 |
Circuit breaker |
1 |
| 11 |
External heat source indicator |
1 |
| 12 |
Sensor line interface |
1 |
| 13 |
Network port |
1 |
| 14 |
External heat source water inlet |
1 |
| 15 |
External heat source drain outlet |
1 |
| 16 |
Circulating pipeline water outlet |
1 |
| 17 |
Circulating pipeline water inlet |
1 |
| 18 |
Pressure and temperature mechanical meter |
1 |
| 19 |
Circulating water pump |
1 |
| 20 |
Pressure tank |
1 |
| 21 |
Manual exhaust valve |
1 |
| 22 |
Water end drain outlet |
1 |
| 23 |
Electric heater |
1 |
| 24 |
Water meter |
1 |
3.2 Product accessories
| No. |
Name |
Qty. |
| 1 |
Black silicone tube inner diameter 16 mm single layer high temperature resistance 120℃ 10 meters |
2 |
| 2 |
Signal line |
1 |
| 3 |
Network cable |
1 |
| 4 |
Inner diameter 16 mm transparent steel wire hose high temperature resistance 160° |
1 |
| 5 |
USB flash drive |
1 |
| 6 |
Pipe clamp |
11 |
4. Product Teaching Experiment List (See The Experiment Guide For Details)
(1) Working condition 1: Automated method to deal with the risk of frost and freezing
(2) Working condition 2: Automated method when the light intensity is good
(3) Working condition 3: Automated method when the light intensity is good and the hot water demand is too high
(4) Working condition 4: Automated method when the light intensity is poor
