Whatsapp: 0086-15153106200

Anaerobic water treatment didactic equipment school equipment teaching mechanical training equipment

Item No.: MR-CE 702
Anaerobic water treatment didactic equipment school equipment teaching mechanical training equipment
Description
MR-CE 702 Anaerobic water treatment didactic equipment school equipment teaching mechanical training equipment
 
Description
CE 702 demonstrates the biological anaerobic water treatment. The trainer consists basically of two units:
- stirring tank with secondary clarifier
- UASB reactor

Both units can be used separately or in combination. This allows both a single stage and a dual stage operation mode. In the dual stage operation a pump first transports the raw water into a stirred tank. In this tank the acidification of the organic substances dissolved in the raw water takes place. Here, anaerobic microorganisms convert the long-chain organic substances into short-chain organic substances. In a secondary clarifier the biomass discharged from the stirred tank is separated from the water. The separated biomass is pumped back into the stirring tank.

From the secondary clarifier the raw water pretreated in this manner reaches a UASB reactor (UASB: Upflow Anaerobic Sludge Blanket). Here the final step of the anaerobic degradation takes place. The previously formed short-chain substances are converted by special microorganisms into biogas (methane and carbon dioxide). Flow through the UASB reactor is from the bottom to the top. At the top of the UASB reactor there is a separation system. This separates the generated gas from the treated water. It also ensures that the biomass remains in the reactor. The gas can be discharged externally or collected. The treated water exits at the top end of the reactor and is collected in a tank.


To adjust the flow velocity in the UASB reactor a of the treated water can be recirculated.

The temperatures in the stirred tank and the UASB reactor can be controlled. The pH value in the stirred tank is measured. In addition, the pH value in the UASB reactor can be controlled. A software and webcam are available for data acquisition and visual inspection.

Anaerobic biomass and analysis technology are required to perform the experiments. Recommended parameters are: COD (chemical oxygen demand), nitrogen and phosphor.

Technical details
Specification
anaerobic degradation of organic substances
stirred tank with secondary clarifier
UASB reactor with separation system
separate supply unit with tanks for raw water and treated water
single stage or dual stage operation mode
temperatures in the stirred tank and the UASB reactor can be controlled
control of the pH value in the UASB reactor
 software for data acquisition via USB under Windows 7, 8.1, 10
visual inspection with webcam


Technical data
Tanks
stirred tank: 30L
secondary clarifier: 30L
UASB reactor: 50L
tank for raw water: 180L
tank for treated water: 180L
Flow rates (max.)
raw water pump: 10L/h
return sludge pump: 10L/h
circulation pump: 100L/h
metering pumps: 2x 2,1L/h

Measuring ranges
pH value: 0…14
temperature: 0…100°C

400V, 50Hz, 3 phases
400V, 60Hz, 3 phases
230V, 60Hz, 3 phases