Distillation Column Teaching Equipment Didactic Electrical Lab Equipment

Item No.: MR CE 602
Distillation Column Teaching Equipment Didactic Electrical Lab Equipment
Description
MR CE 602 Distillation Column Teaching Equipment Didactic Electrical Lab Equipment 
Description
Distillation is used to separate liquid mixtures made up of individual liquids that are soluble in one another. Rectification refers to distillation in a counterflow. Ethanol/water is recommended as the liquid mixture for the device. The liquid mixture is added to the evaporator (bottom) tank. The mixed vapour produced moves upwards in the column. The mixed vapour contains a higher concentration of the component with the lower boiling point (ethanol). It leaves the top of the column and is condensed using a condenser and a phase separation tank. Part of the condensate is collected in a tank as product while the rest is fed back into the column. Here, on its way downwards, it undergoes further heating and material exchange with the rising mixed vapour. This exchange causes the vapour phase to become richer in ethanol and the liquid phase to become richer in water. The liquid phase moves to the bottom where it is collected. A sieve tray column and a packed column are available. The packed column is filled with Raschig rings. The reflux ratio is adjusted using valves. Relevant measured values are recorded by sensors and displayed digitally on the switch cabinet. The evaporator is adjusted using a PID controller.A large, clear process schematic on the switch cabinet makes it easy to assign all the process variables.

Specification
1.discontinuous rectification with packed and sieve tray column
2.interchangeable columns
3.sieve tray column with 8 trays
4.packed column with Raschig rings
5.vacuum mode possible with water jet pump
6.electrically heated evaporator
7.tank for top product
8.condenser and phase separation tank for top product
9.all tanks made of DURAN glass and stainless steel
10.adjustment of reflux ratio using valves
11.8 temperature measuring points per column

Technical data
Columns: internal diameter: 50mm, height: 765mm
Water jet pump: final vacuum: approx. 200mbar
Tanks
top product: approx. 2000mL
phase separation: approx. 500mL
Evaporator
power output: 0…4kW
tank: approx. 10L
Heat transfer surface
top product condenser: approx. 0,04m2

Measuring ranges
temperature: 13x 0…150°C
reflux ratio: 0…100%
flow rate: 30…320L/h (cooling water)
differential pressure: 0…60mbar (column)
manometer: -1…0,6bar
400V, 50Hz, 3 phases
230V, 60Hz, 3 phases, 400V, 60Hz, 3 phases
UL/CSA optional
Dimensions and weight
LxWxH: 1300x750x2100mm
Weight: approx. 210kg
Required for operation
water connection: 500…1000L/h, drain