MRPCB08 High Speed Directional Pulse Hole Metallizing Didactic Equipment PCB Product Line System
I. Introduction |
Structure ★1.Use high speed pulse power source for plating, supply uniform good quality coating. ★2.Fully ABS engineer plastic machine body and inner groove, with antiseptic, thermo stability, technology flow is beautiful. ★3.Environment protection black hole technology flow application, No pollution, it can direct discharge. ★4. Cathode oscillation technology, prevent , concentration gradient, add hole inner liquid flowability. Technical specification: ★1.With 4 groove structure, with acid-washing, soak conducting resin, activate, electroplating function. ★2.Use transparent flip function, it is easy to observe and storage. ★3. Maximum board: 400×400mm, it can electroplating 5 boards at the same time. ★4. Minimum hole diameter: 0.3mm ★5.Maximum thickness ratio 5:1 ★6.Output frequency: 0-2kHz adjustable(it can change as DC power) ★7.Output current: forward direction 0-5A, reverse 0-20A adjustable. ★8.Pulse width: use pulse directional power, forward direction 0-100%, reverse pulse 0 to 100% single adjustable. 9.constantvoltage constant current: current or voltage is constant, with self adjust function, 2 directional current real time display function. ★10.time setting: work time preset function, time remaining display and automatic power off alarm. ★11.LCD:6 inch full color LCD, display all work specification. 12.Circuit protection: with short circuit, open circuit function, supply alarm signal. |