MR105A Electric Vehicle Power System Training Bench Automotive Training Equipment Educational Equipment
Product introduction
This training platform is suitable for all types of higher and secondary vocational schools to conduct theoretical and practical teaching of new energy vehicle powertrains; it can fully display the structure and working principles of new energy vehicle powertrains and help students understand abstract control theories; it can Diagnose and detect common mechanical faults in new energy vehicle powertrains, and train students' ability to analyze and solve practical problems.
This training platform includes a new energy motor assembly, a motor control system, a measurement panel, and corresponding documents; the platform is assembled from high-strength aluminum alloy profiles. The bottom is equipped with 4 swivel casters (2 with brakes and 2 without brakes) for easy movement.
Equipment panel diagram
Instructions
1. Place the training system on a level hard surface and secure the system’s self-locking casters.
2. Wear high-voltage safety clothing and high-voltage safety gloves. Check whether each component is loose during transportation. If loose, please deal with it in time to avoid malfunction during operation.
3. Check whether the connecting cables of the training system are intact and damaged, and whether there are water stains or dirt on the joints.
4. Check whether the metal parts at the connection cable interface of the training system are intact and whether the pins are bent or disconnected.
5. Lift the high-voltage level maintenance switch and connect the negative pole of the 12V battery (confirm the positive and negative poles of the battery, and make sure not to connect them reversely, as reverse connection will cause damage to the accessories)
6. Turn on the "power switch" on the training system. The system is powered on and the instrument lights up, indicating that the training system is powered on normally.
7. The system starts to work; electrical system voltage measurement and diagnosis can be performed.
8. After the training is completed, please turn off the bench power system and disconnect the 12V battery. To prevent battery loss and damage caused by long-term use.
