MR-MPS2200 Modular Product System Mechatronics Training Equipment Vocational Training Equipment
1. Equipment Overview
This system is mainly composed of feeding unit, testing unit, processing unit, handling unit and storage unit. Each unit is installed on the grooved aluminum substrate, and each unit can be easily connected together to form an automatic processing line.
Consisting of various modular forms, each module is easy to build, disassemble and maintain, and each workstation can be freely combined.
2. Safety And Accident Prevention
Before using the equipment, please read this operation and maintenance manual carefully, and strictly abide by the operation guidelines in this manual. Before each use, check that all safety devices are functioning properly. The equipment must be operated by well-trained personnel. New operators must be fully trained and the first operation must be under the guidance of skilled operators.
3. Technical Parameters
1. Input power: AC220V±10%50HZ
2. Input voltage: ≤5kw
3. Working environment: Temperature: -10℃~+40℃; 2) Relative humidity: ≤90% (+20℃); 3) Altitude: ≤4000m; 4) Clean air, no corrosive and explosive gases, no Conductive and insulating dust
4. Equipment Composition
4.1 Button introduction
4.2 Blocks
4.3 Accessories
U disk (data disk)
PLC communication programming cable (driver installation package in U disk)
4.4 ASDA-B2 servo controller and motor introduction refer to Appendix A
4.5 A1-SVD15 Servo Controller Introduction and Instructions Refer to Appendix B
4.6 Please refer to Appendix C for PLC sample program
4.7 Please refer to Appendix D for PLC application instructions
4.8 Introduction of capacitive sensor
4.9 Inductive sensor
4.10 Introduction of photoelectric sensor
4.11 Touch Screen Application Notes Refer to Appendix E
5.Completable experiment content
Experiment 1 Feeding unit
Experiment 2 detection unit
Experiment 3 processing unit
Experiment 4 handling unit
Experiment 5 storage unit
Experiment 6 running online
